Jackhammers pneumatic

Hammers should be operated at a pressure of compressed air at least 3 atm to 5 atm, with long sleeves, a supply air, no more than 12 m and a length of 70 mm tool shank

Operating tool or pneumatic drill Hammers - peak, its main purpose - directional impact. Depending on the type of work using different peaks, the peaks produced sharp tetrahedral, spades, chisels and spades, shovels. Shank peaks has the following parameters: diameter - 24 mm, length - 70 mm. Peak may reach a length of 300 to 740 mm, and in some cases - 1500 mm or more.

Hydraulic Crashers is a pneumatic tool, designed for more complex work, led to stringent and require high energy single impact than pneumatic drills. Hammers are used for the destruction of more solid material: concrete pavement, concrete foundations, terminal strips, bridges, concrete structures, the destruction of buildings and reconstruction of facilities used for emergency and rescue operations increased complexity.

Features Hammers - is the impact energy, measured in joules and frequency of attacks per second.

Among the advantages Hammers are the following:

• Hammers in the high impact energy (65 and 85 J), reduced weight, vibration and sound insulation;
• Demolition hammer, just because the equipment efficiency for absorption of noise and vibration, extremely convenient in operation and maintenance, provides high performance while carrying out work with a more severe requirements;
• Thanks to ergonomically perfected design concrete breakers, you can work them for a long time, providing minimal risk to the health of the operator;
• Thanks to all of its technical and operational data, demolition hammer is an indispensable tool for the construction works of high complexity.
  

Among the advantages of drills are the following:

• Built vibroprotection eliminates operator working tool from almost 75% of the vibrations, and thereby significantly reduces the risk of vibration disease (numbness of the fingers and wrist) and allows no voltage to maximize the hammer during the work shift;
• Equipment hammers Silencers, which will reduce to 2-4 times the levels of sound power at all frequencies. This greatly reduces the risk of hearing damage with prolonged use of hammers;
• High-power (the ratio of impact energy to the mass of the hammer) makes the work less physically exhausting;
• Electroplating hammers, which provides protection against corrosion, makes it possible to start operation without prior depreservation.