Products
Our Production
Road and building equipment
|
Cutting and bending reinforcement
Cutting of reinforcing
steel used in the procurement areas of factories JBI, house-building
factories, construction sites. With European
manufacturing technology, machines for cutting valves have high
reliability, performance, operational safety and ergonomics.
Cutting valves are simple
and user friendly, have a high service life. Cutting of reinforcing
steel can be used for cutting round, square and flat steel with a
tensile strength of 470 MPa. The drive of the working
body of machine tools (knife) from the electric motor through a
mechanical transmission.
Benefits of Cutting
Fixtures:
- Possible to cut 2-D and
3-rods at the same time;
- The main body of the machine for cutting reinforcement placed a table of permissible
diameters used fittings;
- Profiles of the knife: a
single and continuous:
- Machine cut
reinforcement A-40 - 60 times / min
- Machine cut
reinforcement A-40M - 90 times / min
- Machine cut
reinforcement A-42 - 60 times / min
- Machine for cutting
valves A-50 - 50 times / min;
- Mobile and stationary
blades have 8 cutting edges each. Knives are
interchangeable;
- Light weight and
dimensions of the machine for cutting of reinforcement;
- For ease of
transportation equipment for cutting valve is equipped with removable
wheels and eyebolt;
- Low maintenance: gear cutting valve in oil "bath" (oil change once a year, no additional
lubrication);
- Ability to use the machine for cutting bars at subzero temperatures (temperature -20 C -27
C);
- Cutting machine Valve
has manual and pedal drive;
- Cutting machine is
equipped with valve protection devices for safe operation of the
operator;
- Machine cut
reinforcement has Certificate of State Standard of Russia.
|
Send request
|
Technical parameters
Model |
class fixtures |
Engine |
Dimensions,
cm
|
Weight,
kg |
А-I (А240) |
А-III (А400) |
А-500С |
Аt500 |
number of rods in a one-time cutting, pieces. |
1 |
2 |
3 |
1 |
2 |
3 |
1 |
2 |
3 |
1 |
2 |
3 |
maximum diameter of the rods, mm |
А-40 |
40 |
22 |
14 |
32 |
20 |
12 |
28 |
18 |
10 |
32 |
20 |
12 |
380V
3 kw |
87х50х74 |
290 |
А-40М |
36 |
30 |
20 |
32 |
22 |
16 |
28 |
18 |
14 |
30 |
22 |
16 |
380V
3 kw |
105х60х82 |
450 |
А-42 |
42 |
24 |
16 |
36 |
20 |
12 |
32 |
18 |
10 |
36 |
20 |
12 |
380V
3 kw |
102х60х88 |
380 |
А-50 |
50 |
32 |
20 |
40 |
28 |
14 |
36 |
25 |
14 |
40 |
26 |
14 |
380V
4 kw |
122х70х98 |
620 |
The cutting process
occurs when moving the movable knife is relatively immobile. To convert the rotary
motion of the motor shaft to reciprocating motion of the working body of
the rocker mechanism is used.
Cutting reinforcing steel work in the mode of continuous cutting.
Cutting valves consist of
the following main components: staniny assembly, a rocker mechanism,
drive mechanism, motor with electric equipment.
|
|