Products
Our Production
Road and building equipment
|
Pneumatic blower PN-500 is designed for preparation and transportation of construction mixes to the place of their use.
Pneumatic blower used in the construction of buildings and structures.
Pneumatic blower PN-500 allows you to mechanize the process of preparation and transportation of any building mixtures.
The advantages of air blowers general:
-
air blower works with any construction mixtures;
-
air blower combines concrete pump and mixer;
-
the possibility of mixing directly on the building site (save up to 60% of funds in comparison with the commercial mixture);
-
connectivity Concrete wires of different diameters;
-
transportation of construction mixtures with aggregate size to 30 mm;
-
ability to install skip devices;
-
use of components of leading world producers.
Advantages of air blower PN-500:
-
high productivity;
-
ability to use any source of compressed air;
-
ability to use air blower in closed rooms;
-
ability to use air blower in places with higher requirements to the noise;
-
low energy consumption;
-
increased reliability of operation due to the simplicity of design air blower;
-
drive BONFIGLIOLI.
|
Send request
|
Technical parameters
Features air blower
|
Pump Type |
pneumatic |
Productivity, m3 / h |
5 - 8 |
Pressure on the mixture, bar |
to 7 |
Feeding height, m |
60 |
Range of feed, m |
150 |
Concrete plug diameter, mm |
65 / 75 / 100 |
Tank capacity, m3 |
0,6 |
The volume of the finished dough, m3 |
0,5 |
Drive air blower |
Drive Type |
electric |
Model |
STM / Bonfiglioli |
Power, kW |
11 |
Fuel consumption, l / h |
- |
Fuel tank capacity, l |
- |
Air compressor air blower |
Compressor Type |
no
|
Compressors |
- |
Productivity (recommended), m3 / min |
4,2 |
Pressure (recommended), bar |
7 |
Hydraulic system air pump concrete |
System Type |
- |
Pressure systems, bar |
- |
Pump Model |
- |
Volume of oil tank, l |
- |
Dimensions and chassis air pump concrete |
Chassis |
- |
Length * Width * Height, m |
2,86 * 1,46 * 1,48 |
Weight, kg |
910 |
Concrete mix for concrete pump air |
Aggregate size, mm |
up to 30 |
Mark on the workability |
from P3 |
The mobility of the mixture (slump), cm |
from 12 |
Mortar mix |
any |
* - when the compressor capacity of up to 5 m 3 / min. When using a more powerful compressor suction head increases.
** - when applying mortar with high mobility may mark its stratification. |
Pneumatic blower PN-500 is produced in the performance on wheels or on runners.
|
|